Soleno

CIVIL ENGINEERING



	TX GEOTEXTILES



	DRAINCOTEX / DRAINATEX



	TX-R



	TX-MP



	TEXGUARD



	TX-F

DRAINCOTEX / DRAINATEX

PROPERTIES	TEST METHOD	VALUE
FILTER
Weight	CAN-148.1 No. 2-M85	125 g/m² ± 15 g/m²
Filtration Opening Size	CAN-148.1 No. 10	100 ± 20 microns
Permeability	CAN-148.1 No. 4	1,5 x 10^-1 cm/sec ± 10%
DRAIN
Weight	CAN-148.1 No. 2-M85	700 g/m² ± 70 g/m²
Transmissivity (Hydraulic Gradient of 1)	ASTM D-4716	See information below to respect minimum value
COMPOSITE
Weight	CAN-148.1 No. 2-M85	950 g/m² ± 100 g/m²
Grab Tensile Strength	CAN-148.1 No. 7.3	1000 N
Grab Tensile / Elongation	CAN-148.1 No. 7.3	50 - 100%
TRANSMISSIVITY ACCORDING TO COMPRESSION
CONSTRAINT kPa	THICKNESS (± 15 %) mm	TRANSMISSIVITY (± 15 %) m²/s
8	8,00	8,0 x 10^-5
20	6,90	6,5 x 10^-5
50	5,75	4,1 x 10^-5
200	3,40	9,0 x 10^-6
ROLLS STANDARD DIMENSION
Drainatex	3,4 x 30 meters
Draincotex	Filtration pocket for 100 mm pipe	0.45 x 30 m, 0.65 x 30 m, 0.85 x 30 m
Draincotex	Filtration pocket for 150 mm pipe	1,0 x 30 m, 1,2 x 30 m
CONSTRUCTION
Fiber Type	Polypropylene / Polyester (White - Black)
Construction Type	Needlepunched Nonwoven

March 2006 — Legal disclaimer

TX-MP

PROPERTIES	VALUE
Composition	Laminated PVC geomembrane on a geotextile (400 gr / m²)
Thickness	5 mm ± 0.5
Fiber Type	Polypropylene

March 2006 — Legal disclaimer

TEXGUARD

PROPERTIES	TEST METHOD	VALUE
PHYSICAL
Grab Tensile Strength	CAN-148.1 - no 7.3 ASTM D 4632	600 N
Grab Tensile / Elongation	CAN-148.1 - no 7.3 ASTM D 4632	15%
Mullen Burst	CAN-4.2 - no 11.1 ASTM D 3786	2000 kPa
Trapezoid Tear	CAN-4.2 - no 12.2 ASTM D 4533	200 N
HYDRAULIC
Apparent Opening Size (AOS)	ASTM D 4751	0,600 mm
Permittivity	CAN-148.1 - no 4 ASTM D 4491	0,5 sec ^-1
ROLLS STANDARD DIMENSION
1,27 x 30 meters, with wood sticks every 4 meters
CONSTRUCTION
Fiber Type	Black Polypropylene
Construction Type	Woven

March 2006 — Legal disclaimer

GEOTEXTILE FOR FORESTRY APPLICATIONS

PROPERTIES	TEST METHOD	VALUE
PHYSICAL
Grab Tensile Strength	CAN-148.1 No. 7.3	Typical 1 100 N Min 1 000 N
Grab Tensile / Elongation	CAN-148.1 No. 7.3	40 – 100%
Trapezoid Tear	CAN-4.2 No. 12.2	Typical 450 N Min 350 N
Mullen Burst	CAN-4.2 No. 11.1	Typical 2 900 kPa Min 2 600 kPa
Thickness	CAN-148.1 No. 3-M85	1,5 mm
HYDRAULIC
Permeability	CAN-148.1 No. 4	2,2 x 10^-1 cm/sec
Filtration Opening Size	CAN-148.1 No. 10	50 – 80 microns
ROLLS STANDARD DIMENSION
Standard Width	3,5 meters
Standard Lenght	100 meters
CONSTRUCTION
Fiber Type	Grey Polypropylene
Construction Type	Needlepunched Nonwoven

March 2006 — Legal disclaimer

TX-R

PROPERTIES	TEST METHOD	VALUE
PHYSICAL
Grab Tensile Strength	CAN-148.1 No. 7.2-M (Wide strips)	11 kN/m ± 1 kN/m
Mullen Burst	CAN-4.2 No. 11.1	2 600 kPa
Thickness	CAN-148.1 No. 3-M85	1,6 mm
HYDRAULIC
Permeability	CAN-148.1 No. 4	3,1 x 10^-1 cm/sec
Filtration Opening Size	CAN-148.1 No. 10	40 – 60 microns
ROLLS STANDARD DIMENSION
Standard Width	3,5 meters
Standard Lenght	100 meters
CONSTRUCTION
Fiber Type	Polypropylene / Polyester
Construction Type	Needlepunched Nonwoven Reinforced by woven

March 2006 — Legal disclaimer

Nonwoven TX geotextiles are produced from the most commonly used polymers such as polyester, polypropylene and high-density polyethylene.

Meeting our clients’ specific needs, TX geotextiles comply with the most stringent standards of the construction industry.

For detailed information on the physical and hydraulic properties of our line of nonwoven TX geotextiles, click on the following links.

See the chart in PDF format:
[Imperial] [Metric]

If you don't have Acrobat Reader instaled, you can get it by clicking here.

CIVIL ENGINEERING